The extremely durable pulverized lava rock material we constructed this blanket with is capable of handling over 2000°F direct contact heat.  The cover easily helps keep heat off the filter in turn reducing engine oil temps.

Install is very easy and stays in place.

The construction of this blanket incorporates a magnet to help keep the cover in place.  The magnet also helps boost the oil filters efficiency by catching any fine debris and keeping it at the now magnetized surface of the filter.

The pull handle on the end of the blanket makes removal extremely easy before removing the oil filter.

The aluminized internal layer helps make any accidental oil spill extremely easy to clean off the cover.

The extremely durable pulverized lava rock material we constructed this blanket with is capable of handling over 2000°F direct contact heat.  The cover easily helps keep heat off the filter in turn reducing engine oil temps.

Install is very easy and stays in place.

The construction of this blanket incorporates a magnet to help keep the cover in place.  The magnet also helps boost the oil filters efficiency by catching any fine debris and keeping it at the now magnetized surface of the filter.

The pull handle on the end of the blanket makes removal extremely easy before removing the oil filter.

The aluminized internal layer helps make any accidental oil spill extremely easy to clean off the cover.

The blanket is made with a highly durable 3000°F rated Lava outer jacketing which incorporates an aluminum bonded internal layer to further protect the blanket itself from external elements.  The inside 6-pound density ceramic layer is rated to withstand up to 2500° Fahrenheit direct heat.

With the added feature of a hook and loop closure system this blanket can be installed in a matter of minutes.

This blanket will keep engine bay temperatures very low and add life to your Subaru CV boots which commonly deteriorate due to added heat after installing an aftermarket downpipe.

The blanket handles 2500°F direct heat internally.  It is made with high density ceramic interior.  It utilizes stainless steel T style button rivets to tightly secure the blanket into place.

As with all Thermal Zero blankets this was made with pride in the U.S.A.

The blanket handles 2500°F direct heat internally.  It is made with high density ceramic interior.  It utilizes stainless steel T style button rivets to tightly secure the blanket into place.

The Thermal Zero proprietary aluminum bonded pulverized lava rock exterior jacketing material adds an extra layer of heat retention and durability to this blanket.  Making it capable of handling over 2000°F externally as well as internally.

As with all Thermal Zero blankets this was made with pride in the U.S.A.

This blanket is a three layer design consisting of a heavy 6 pound density 1/2″ thick ceramic wool inner layer construction that easily handles 2500°F.  This is sandwiched between a heavy duty pulverized lava rock fiber outer layer and a protective stainless steel knitted wire mesh inner layer.  The entire blanket is extremely durable and very well built by hand here in the USA.

Our Lava line of blankets are different from our other turbo blankets in that they feature an outer jacketing that is made from an extremely heavy duty and high quality pulverized lava rock fiber instead of silica impregnated fiber.  This lava material is actually different than what any other turbo blanket manufacturer uses in that it features an aluminum bonded layer on the inside of the blanket to further reflect the small amount of radiant heat which makes it through the ceramic layer.  With this combination of materials we have seen up to 90% efficiency out of a Lava blanket on certain applications.

Generally speaking if you own a turbo subaru and still have the OEM turbocharger then this blanket will fit.  If you upgraded the turbo to a larger exhaust housing yet still retain the internal wastegate design then you need the long version (TZ1195).  Easy enough right?  We have been selling this pattern blanket for years and have yet to hear a bad remark about it. It fits a whole lot of turbos very well and does one simple job very well also.  That is holding heat in away from surrounding lines and components and allowing the turbo to spool noticeably faster thus making power.

Ditch the stock heat shield that does nothing for you and install one of these blankets.

This blanket is a three layer design consisting of a heavy 6 pound density 1/2″ thick ceramic wool inner layer construction that easily handles 2500°F.  This is sandwiched between a high temperature silicone impregnated fiberglass outer layer and a protective stainless steel knitted wire mesh inner layer.  The entire blanket is extremely durable and very well built by hand here in the USA.

Generally speaking if you own a turbo subaru and still have the OEM turbocharger then this blanket will fit.  If you upgraded the turbo to a larger exhaust housing yet still retain the internal wastegate design then you need the long version.  Easy enough right?  We have been selling this pattern blanket for years and have yet to hear a bad remark about it. It fits a whole lot of turbos very well and does one simple job very well also.  That is holding heat in away from surrounding lines and components and allowing the turbo to spool noticeably faster thus making power.

Ditch the stock heat shield that does nothing for you and install one of these blankets.

This blanket is a three layer design consisting of a heavy 6 pound density 1/2″ thick ceramic wool inner layer construction that easily handles 2500°F.  This is sandwiched between a heavy duty pulverized lava rock fiber outer layer and a protective stainless steel knitted wire mesh inner layer.  The entire blanket is extremely durable and very well built by hand here in the USA.

Our Lava line of blankets are different from our other turbo blankets in that they feature an outer jacketing that is made from an extremely heavy duty and high quality pulverized lava rock fiber instead of silica impregnated fiber.  This lava material is actually different than what any other turbo blanket manufacturer uses in that it features an aluminum bonded layer on the inside of the blanket to further reflect the small amount of radiant heat which makes it through the ceramic layer.  With this combination of materials we have seen up to 90% efficiency out of a Lava blanket on certain applications.

Generally speaking if you own a turbo subaru and still have the OEM turbocharger then this blanket will fit.  If you upgraded the turbo to a larger exhaust housing yet still retain the internal wastegate design then you need the long version.  Easy enough right?  We have been selling this pattern blanket for years and have yet to hear a bad remark about it. It fits a whole lot of turbos very well and does one simple job very well also.  That is holding heat in away from surrounding lines and components and allowing the turbo to spool noticeably faster thus making power.

Ditch the stock heat shield that does nothing for you and install one of these blankets.

For a fastening system we installed extremely durable T style stainless steel rivet style fasteners which easily close the blanket with the supplied wire.  This blanket will keep engine bay temperatures very low and add life to your Subaru CV boots which commonly deteriorate due to added heat after installing an aftermarket downpipe.